C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 1 8 4 _V 7 .2 , R EV - D
|
1 3
RED RANGER OPERATION GUIDE
CHAPTER 2:
CAMERA SYSTEM COMPONENTS
NOTE:
Lens mounts are NOT HOT SWAPPABLE, meaning you cannot remove or install these items while the camera
is turned on. Before installing or removing these items, you MUST turn off the camera. Failure to do so may result in
damage to the item or camera that is not covered under warranty.
NOTE:
Availability of components listed in this chapter is subject to change at any time.
RED RANGER CAMERA BODY
This section describes the controls, buttons, and features on the RED RANGER camera body. For information on the
input/output connectors, go to
"Input/Output Connectors" on page 193
Figure: Camera Body Controls and Features
