10
The Security Code determines the programming mode and the accessibility
of programming parameters. This code can be used along with the Program
Mode Lock-out (
Pro Loc
) in the User Input Function parameter (Module 1).
Two programming modes are available. Full Programming mode allows all
parameters to be viewed and modified. Quick Programming mode permits only
the setpoint output time-out and counter load values (when applicable) to be
modified, but allows direct access to these values without having to enter Full
Programming mode.
Programming a Security Code other than 0, requires this code to be entered
at the
Pro CodE
prompt in order to access Full Programming mode. Depending
on the code value, Quick Programming may be accessible before the
Pro CodE
prompt appears (see chart).
PROGRAMMING SECURITY CODE
The
yES
selection will return the meter to the factory default settings. The
meter will display
rESEt
and then return to
Pro
, at which time all settings have
been changed.
LOAD FACTORY DEFAULT SETTINGS
0
to
999
yES
NO
"
#
000
Pro CodE
"
#
MO
FACt SEt
* Entering Code 222 allows access regardless of security code.
The
yES
selection allows the
SEL
button to toggle through the enabled
displays.
FRONT PANEL DISPLAY SELECT ENABLE (SEL)
The
yES
selection allows the
RST
button to reset the selected counter(s). The
shaded selections are only active when Counter B is enabled (Dual Count mode
or batch counter).
FRONT PANEL COUNTER RESET ENABLE (RST)
The
yES
selection allows the display to automatically scroll through the
enabled displays. Each display is shown for 4 seconds.
DISPLAY SCROLL ENABLE
NO
yES
Count b
both A-b
dSPLAy
yES
NO
NO
Count A
NO
yES
"
#
yES
SEL Enb
"
#
YES
RSt Enb
"
#
NO
d-ScroLL
Enter the desired display color, red or green. This parameter is active for
backlight units only.
DISPLAY COLOR (BACKLIGHT UNIT ONLY)
6rn
rEd
"
#
rEd
d-COLOr
Enter the desired Display Intensity Level (1-5). The display will actively dim
or brighten as levels are changed. This parameter is active for backlight units only.
DISPLAY INTENSITY LEVEL (BACKLIGHT UNIT ONLY)
"
#
5
d-LEVEL
1
to
5
Select
YES
to momentarily display the meter software version before advancing
to the next parameter. The software version is also displayed at power-up.
SOFTWARE VERSION DISPLAY
"
#
NO
CodE UEr
6.3 MODULE 3 - D
ISPLAY AND
F
RONT
P
ANEL
K
EY
P
ARAMETERS
(
3-dSPLAY
)
PARAMETER MENU
NO
yES
Immediate Access
Full Programming
0-999
Not Active
With correct code entry
at
Pro CodE
prompt *
Pro CodE
prompt
100-999
Pro Loc
No Access
Quick
Programming
1-99
Active
No Access
Programming
Lock
0
With correct code entry
at
Pro CodE
prompt *
Pro CodE
prompt
100-999
After Quick Programming
with correct code entry
at
Pro CodE
prompt *
Quick
Programming
1-99
______
not
Pro Loc
Immediate Access
Full Programming
0
FULL PROGRAMMING
MODE ACCESS
MODE WHEN “SEL”
KEY IS PRESSED
SECURITY
CODE
USER INPUT
STATE
USER INPUT
FUNCTION
