Red Hat DIRECTORY SERVER 7.1 Administrator'S Manual Download Page 71

Page: 71 / 652

LDIF Update Statements

Chapter 2

Creating Directory Entries

Deleting a Specific Attribute Value Using LDIF

Use

changetype:modify

with the delete operation to delete an attribute value

from an entry.

For example, consider the following entry:

cn=Barney Fife,ou=People,dc=example,dc=com
objectClass: inetOrgPerson
cn: Barney Fife
sn: Fife
telephonenumber: 555-1212
telephonenumber: 555-6789

To delete the

555-1212

telephone number from this entry, use the following LDIF

update statement:

dn: cn=Barney Fife,ou=People,dc=example,dc=com
changetype: modify
delete: telephonenumber
telephonenumber: 555-1212

Barney’s entry then becomes:

cn=Barney Fife,ou=People,dc=example,dc=com
objectClass: inetOrgPerson
cn: Barney Fife
sn: Fife
telephonenumber: 555-6789

Deleting an Entry Using LDIF

Use

changetype:delete

to delete an entry from your directory. You can only

delete leaf entries. Therefore, when you delete an entry, make sure that no other

entries exist under that entry in the directory tree. That is, you cannot delete an

organizational unit entry unless you have first deleted all the entries that belong to

the organizational unit.

For example, of the following three entries:

ou=People,dc=example,dc=com
cn=Paula Simon,ou=People,dc=example,dc=com
cn=Jerry O’Connor,ou=People,dc=example,dc=com

you can delete only the last two entries. The entry that identifies the

People

subtree

can be deleted only if no other entries exist below it.

The following LDIF update statements can be used to delete person entries:

Summary of Contents for DIRECTORY SERVER 7.1













































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands

Red Hat DIRECTORY SERVER 7.1, Administrator'S Manual

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands