Red Hat DIRECTORY SERVER 7.1 Administrator'S Manual Download Page 558

Page: 558 / 652

Configuring Windows Sync

558

Red Hat Directory Server Administrator’s Guide • May 2005

Step 2: Configure SSL on Active Directory (Active Directory only).

To configure SSL on Active Directory, see the appropriate user documentation. It

is not necessary to configure SSL for NT4 Server; SSL is enabled when configuring

the NT4 LDAP Service.

Step 3: Install and Configure the Password Sync Service

Password Sync can be installed on any Windows machine to synchronize

Windows passwords. Passwords can only be synchronized if both your Directory

Server and Windows server are running in SSL, the sync agreement is configured

over an SSL connection, and you have configured certificate databases for

Password Sync to access. See “Installing and Configuring the Password Sync

Service,” on page 550, for information on installing and configuring Password

Sync.

Step 4: Configure the NT4 LDAP Service (Windows NT4 Server Only)

Install the LDAP Service on the Windows NT4 Server, set it up as a Windows

service, and modify the configuration file for your Directory Server information.

See “Installing and Configuring the NT4 LDAP Service,” on page 553, for more

information.

Step 5: Select or Create the Sync Identity

The Windows user specified in the sync agreement, which the Directory Server

will use to bind for sync operations, should be a member of the Domain Admins

group (or have equivalent privileges). A member of this group has full privileges

within the domain, but will not necessarily have privileges within other domains

in the Active Directory deployment. This enhances security by limiting the extent

that the Windows directory can be affected by the sync ID to only the

synchronized subtree.

The user specified in the Password Sync and NT4 LDAP Services should be a a

special user that has write access to entries and passwords but, for security

reasons, should not be Directory Manager. Also, this user should not be under the

synchronized subtree. For information on creating a special sync ID, see “Creating

the Supplier Bind DN Entry,” on page 313.

TIP

It may be useful to lock this admin user from being able to logon to

the domain from a physical location. The entry would be able to

modify the directory entries, but no one could use that entry to gain

access to the domain. Refer the Windows documentation for more

information.

Summary of Contents for DIRECTORY SERVER 7.1













































































































































































































































































































































































































































































































































































































































































Red Hat DIRECTORY SERVER 7.1, Administrator'S Manual, Page: 558 / 652

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews: