Red Hat DIRECTORY SERVER 7.1 Administrator'S Manual Download Page 361

Page: 361 / 652

Monitoring Replication Status

Chapter 8

Managing Replication

361

Select the Status tab, and then, in the left navigation tree, select Replication

Status.

In the right pane, a table appears that contains information about each of the

replication agreements configured for this server.

Click Refresh to update the contents of the tab.

The status information displayed is described in Table 8-3.

Monitoring Replication Status from Administration

Express

Although the replication status report that you view via the Directory Server

Console shows many details, it does not show the progress of the replication.

Additionally, because one report is generated per agreement, you need to navigate

among the status reports for different agreements.

Table 8-3

Directory Server Console - Replication Status

Table Header

Description

Agreement

Contains the name you provided when you set up the
replication agreement.

Replica suffix

Contains the suffix that is replicated.

Supplier

Specifies the supplier server in the agreement.

Consumer

Specifies the consumer server in the agreement.

Number of changes

Indicates the number of changes sent to this replica since the

server started.

Last replica update began

Indicates when the most recent replication update started.

Last replica update ended

Indicates when the most recent replication update ended.

Last update message

Provides the status for the most recent replication updates.

Consumer initialization

Provides current status on consumer initialization (in progress
or not).

Last consumer initialization update
message

Provides status on the last initialization of the consumer.

Last consumer initialization began

States when the initialization of the consumer replica started.

Last consumer initialization ended

States when the initialization of the consumer replica ended.

Summary of Contents for DIRECTORY SERVER 7.1













































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands

Red Hat DIRECTORY SERVER 7.1, Administrator'S Manual

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands