Red Hat DIRECTORY SERVER 7.1 Administrator'S Manual Download Page 372

Page: 372 / 652

Troubleshooting Replication-Related Problems

372

Red Hat Directory Server Administrator’s Guide • May 2005

With changelog purge turned on, a purge thread that wakes up every five

minutes will remove a change if its age is greater than the value of

nsslapd-changelogmaxage

and if it has been replayed to all the direct

consumers of this supplier (supplier or hub).

If it appears that the changelog is not purged when the purge threshold is

reached, check the maximum time lag from the replication monitor among all

the consumers. Irrespective of what the purge threshold is, no change will be

purged before it is replayed by all the consumers.

Symptom:

The Replication Monitor is not responding. (For information on Replication

Monitor, see “Monitoring Replication Status,” on page 360.)

Reason:

The SSL port is specified in some replication agreement, but the

certificate database is not specified or not accessible by the Replication

Monitor. If there is no SSL port problem, one of the servers in the replication

topology might hang.

Remedy:

Map the SSL port to a non-SSL port in the configuration file of the

Replication Monitor. For example, if 636 is the SSL port and 389 is the

non-SSL port, add the following line in the

[connection]

section:

*:636=389:*:password

Symptom:

In the Replication Monitor, some consumers show just the header of the table.

(For information on Replication Monitor, see “Monitoring Replication Status,” on

page 360.)

Reason:

No change has originated from the corresponding suppliers. In this

case, the

MaxCSN:

in the header part should be

"None"

Remedy:

There is nothing wrong if there is no change originated from a

supplier.

Summary of Contents for DIRECTORY SERVER 7.1













































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands

Red Hat DIRECTORY SERVER 7.1, Administrator'S Manual

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands