Red Hat DIRECTORY SERVER 7.1 Administrator'S Manual Download Page 327

Page: 327 / 652

Configuring Multi-Master Replication

Chapter 8

Managing Replication

327

Configuring the Read-Write Replicas on the Supplier Servers

Perform these steps on each supplier server, Server A and Server B:

Specify the supplier settings for each server.

In the Directory Server Console, select the Configuration tab.

In the navigation tree, highlight the Replication node.

In the right-hand side of the window, select the Supplier Settings tab.

Check the Enable Changelog checkbox.

This activates all of the fields in the pane below.

Specify a changelog by clicking the “Use default” button, or click the

Browse button to display a file selector.

Set the changelog parameters (number and age).

You must clear the unlimited checkboxes if you want to specify different

values.

Click Save to save the supplier settings.

Create the entry corresponding to the supplier bind DN if it does not exist.

For multi-master replication, it is necessary to create this supplier bind DN on

the supplier servers (as well as the consumers) because they act as both

consumer and supplier to the other supplier servers.

In the Directory Server Console, select the Directory tab.

Create an entry.

For example, you could use

cn=Replication Manager,cn=config

Specify a

userPassword

attribute-value pair.

NOTE

This is the special entry that the supplier will use to bind. The entry

must not be part of the replicated database.

Summary of Contents for DIRECTORY SERVER 7.1













































































































































































































































































































































































































































































































































































































































































Red Hat DIRECTORY SERVER 7.1, Administrator'S Manual, Page: 327 / 652

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews: