Red Hat DIRECTORY SERVER 7.1 Administrator'S Manual Download Page 542

Page: 542 / 652

Replication and the Attribute Uniqueness Plug-in

542

Red Hat Directory Server Administrator’s Guide • May 2005

Enabling the Attribute Uniqueness Plug-in on the consumer will not prevent

Directory Server from operating correctly but is likely to cause a performance

degradation.

Multi-Master Replication Scenario

In a multi-master replication scenario, the masters act both as suppliers and

consumers of the same replica. Because multi-master replication uses a loosely

consistent replication model, enabling an Attribute Uniqueness Plug-in on one of

the servers is not sufficient to ensure that attribute values will be unique across

both masters at any given time. Therefore, enabling an Attribute Uniqueness

Plug-in on one server can cause inconsistencies in the data held on each replica.

However, you can use an Attribute Uniqueness Plug-in, providing both of the

following conditions are met:

• The attribute on which you are performing the uniqueness check is a naming

attribute.

• The Attribute Uniqueness Plug-in is enabled on both masters.

When these conditions are met, attribute uniqueness conflicts are reported as

naming conflicts at replication time. Naming conflicts require manual resolution.

For information on how to resolve replication conflicts, refer to “Solving Common

Replication Conflicts,” on page 364.

Summary of Contents for DIRECTORY SERVER 7.1













































































































































































































































































































































































































































































































































































































































































Red Hat DIRECTORY SERVER 7.1, Administrator'S Manual, Page: 542 / 652

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews: