Red Hat DIRECTORY SERVER 7.1, Administrator'S Manual

Page: 256 / 652

Access Control Usage Examples
256 Red Hat Directory Server Administrator’s Guide • May 2005
1.
In the Directory tab, right click the
HostedCompany1
entry under the
example.com
node in the left navigation tree, and choose Set Access
Permissions from the pop-up menu to display the Access Control Manager.
2.
Click New to display the Access Control Editor.
3.
In the Users/Groups tab, in the ACI name field, type
HostedCompany1
. In the
list of users granted access permission, do the following:
a.
Select and remove All Users, then click Add.
The Add Users and Groups dialog box is displayed.
b.
Set the Search area to Users and Groups, and type
DirectoryAdmin
in the
Search For field.
This example assumes that you have created an administrators role with a
cn
of
DirectoryAdmin
.
c.
Click the Add button to list the administrators role in the list of users who
are granted access permission.
d.
Click OK to dismiss the Add Users and Groups dialog box.
4.
In the Rights tab, click the Check All button.
5.
In the Targets tab, click This Entry to display the
ou=HostedCompany1,ou=corporate-clients,dc=example,dc=com
suffix in
the target directory entry field.
6.
In the Hosts tab, click Add to display the Add Host Filter dialog box. In the IP
address host filter field, type
255.255.123.234
. Click OK to dismiss the
dialog box.
The IP address must be a valid IP address for the host machine that the
HostedCompany1
administrators will use to connect to the
example.com
directory.
7.
In the Times tab, select the block time corresponding to Monday through
Thursday and 8 a.m. to 6 p.m.
A message appears below the table that specifies what time block you have
selected.