Red Hat DIRECTORY SERVER 7.1 Installation Manual Download Page 34

Page: 34 / 96

Chapter 3. Using Express and Typical Installation

3.4. Installing on Red Hat Enterprise Linux Using a Typical

Installation

To install Directory Server on Red Hat Enterprise Linux, do the following:

1. Log in as root.
2. If you have not already done so, download the product binaries file to the installation directory.
3. Use the rpm tool to install the server components, as follows:

rpm -ivh

package

.rpm

The server components are then installed in the default location:

/opt/redhat-ds/

4. Next, you need to create an instance of the Directory Server by running the setup program:

cd /opt/redhat-ds/

./setup/setup

5. Type

to accept the licensing agreement, then

again to continue with setup.

6. Select the installation mode; the default is typical installation.
7. For the hostname, either enter a fully qualified hostname or select the default (which is the local

host).

Caution

The default hostname may be incorrect if the installer cannot locate a DNS name in your

system. For example, you might not have a DNS name if your system uses NIS.

The hostname must be a fully qualified host and domain name. If the default

hostname is not a fully qualified host and domain name, installation fails. Refer to

Section 7.2

Common Installation Problems

for more information about entering a fully

qualified domain name.

8. The setup program then asks you for the

System User

and the

System Group

names.

Enter the identity under which you want the servers to run.
For more information on the user and group names that you should use when running your

servers, refer to Section 1.2.3

Deciding the User and Group for Your Servers

9. For the configuration directory, select the default if this directory will host your

o=NetscapeRoot

tree. Otherwise, enter yes. You will then be asked for the contact

information for the configuration directory.
If the server you are currently installing is not the configuration directory, then the configuration

directory must exist before you can continue this installation.

10. The setup program then asks if you want to use a different installation for your user directory.

The default is

(this installation will be the user directory). However, if you intend this server

instance to be used as a configuration directory only, then you should enter

yes

11. For the Directory Server port, select the default; this will be 389 or a randomly-generated port

number if you already have another application using that port or you are not installing as root.

12. For the Directory Server Identifier, enter a unique value (normally the default is sufficient).

This value is used as part of the name of the directory in which the Directory Server instance is

installed. For example, if your machine’s host name is phonebook, then this name is the default,

and selecting it will cause the Directory Server instance to be installed into a directory labeled

slapd-phonebook

Summary of Contents for DIRECTORY SERVER 7.1

































































































Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands

Red Hat DIRECTORY SERVER 7.1, Installation Manual

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands