Red Hat DIRECTORY SERVER 7.1 Installation Manual Download Page 81

Page: 81 / 96

Glossary

LDAP

Lightweight Directory Access Protocol. Directory service protocol designed to run over TCP/IP

and across multiple platforms.

LDAPv3

Version 3 of the LDAP protocol, upon which Directory Server bases its schema format.

LDAP client

Software used to request and view LDAP entries from an LDAP Directory Server. See also

browser

LDAP Data Interchange Format

See

LDAP Data Interchange Format

LDAP URL

Provides the means of locating Directory Servers using DNS and then completing the query via

LDAP. A sample LDAP URL is ldap://ldap.example.com.

LDBM database

A high-performance, disk-based database consisting of a set of large files that contain all of the

data assigned to it. The primary data store in Directory Server.

LDIF

LDAP Data Interchange Format. Format used to represent Directory Server entries in text form.

leaf entry

An entry under which there are no other entries. A leaf entry cannot be a branch point in a

directory tree.

Lightweight Directory Access Protocol

See

LDAP

Summary of Contents for DIRECTORY SERVER 7.1

































































































Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Red Hat DIRECTORY SERVER 7.1, Installation Manual, Page: 81 / 96

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews: