Red Hat DIRECTORY SERVER 7.1 Installation Manual Download Page 5

Page: 5 / 96

About This Guide

Welcome to Red Hat Directory Server (Directory Server). This manual provides a high-level overview

of design and planning decisions you need to make before installing the Directory Server and describes

the different installation methods that you can use.
This preface contains the following sections:

•

Section 1

Prerequisite Reading

•

Section 2

Directory Server Overview

•

Section 3

Related Information

1. Prerequisite Reading

Before you install Directory Server, we recommend that you read the

Red Hat Directory Server De-

ployment Guide

. This guide covers key concepts on how to design and plan your directory service.

After you finish planning your directory service, follow the steps in this installation guide to install

the Directory Server and its related software components.

2. Directory Server Overview

The major components of Directory Server include:

•

An LDAP server - The core of the directory service, provided by the ns-slapd daemon, and compli-

ant with the LDAP v3 Internet standards.

•

Directory Server Console - An improved management console that dramatically reduces the effort

of setting up and maintaining your directory service. The directory console is part of Red Hat

Console, the common management framework for LDAP directory services.

•

SNMP Agent - Permits you to monitor your directory server in real time using the Simple Network

Management Protocol (SNMP).

•

Online backup and restore - Allows you to create backups and restore from backups while the server

is running.

3. Related Information

The document set for Directory Server also contains the following guides:

•

Red Hat Directory Server Administration Guide

. Contains procedures for the day-to-day mainte-

nance of your directory service. Includes information on configuring server-side plug-ins.

•

Red Hat Directory Server Deployment Guide

. Provides an overview for planning your deployment

of the Directory Server. Includes deployment examples.

•

Red Hat Directory Server Configuration, Command, and File Reference

. Contains information

about using the command-line scripts shipped with Directory Server.

•

Red Hat Directory Server Scheme Reference

. Contains information about the Directory Server

schema.

•

Red Hat Directory Server Plug-in Programmer’s Guide

. Describes how to write server plug-ins in

order to customize and extend the capabilities of Directory Server.

Summary of Contents for DIRECTORY SERVER 7.1

































































































Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands

Red Hat DIRECTORY SERVER 7.1, Installation Manual

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands