Red Hat DIRECTORY SERVER 7.1 Installation Manual Download Page 39

Page: 39 / 96

Chapter 4. Silent Installation and Instance Creation

•

SuiteSpotUserID

and SuiteSpotGroup - The

SuiteSpotUserID

and

SuiteSpotGroup

directives determine under what user and group a server runs when installed.

Note

Be sure to protect your install.inf files because they contain passwords in clear. Also ensure that any

DNs in these files are in the UTF-8 character set encoding.

The sections that follow provide examples of using silent installation to support the following instal-

lation scenarios:

•

Section 4.1.2.1

Sample File for Typical Installation

•

Section 4.1.2.2

Sample File for Using an Existing Configuration Directory

•

Section 4.1.2.3

Sample File for Installing the Standalone Red Hat Console

You can find a definition of each of the individual installation directives in

Section 4.1.3

Specifying Silent Installation Directives

Note

The

silent.inf

file provided with the Directory Server is merely a template, an example of how to

write your own. For the file to work, many of the parameters (host name, ports, paths, and so on) in

the file must be replaced with appropriate values.
It is also easy to generate your own silent installation file using the setup

-k

option and modifying the

resulting

install.inf

file as needed.

4.1.2.1. Sample File for Typical Installation

The following is an example of the

install.inf

file that is generated for a typical installation:

[General]

FullMachineName= dir.example.com

SuiteSpotUserID= nobody

SuiteSpotGroup= nobody

ServerRoot= /opt/redhat-ds/servers

AdminDomain= example.com

ConfigDirectoryAdminID= admin

ConfigDirectoryAdminPwd= admin

ConfigDirectoryLdapURL= ldap://dir.example.com:389/o=NetscapeRoot

UserDirectoryAdminID= admin

UserDirectoryAdminPwd= admin

UserDirectoryLdapURL= ldap://dir.example.com:389/dc=example,dc=com

Components= svrcore,base,slapd,admin,nsperl,perldap

[slapd]

SlapdConfigForMC= Yes

SecurityOn= No

UseExistingMC= No

UseExistingUG= No

ServerPort= 389

ServerIdentifier= dir

Suffix= dc=example,dc=com

Summary of Contents for DIRECTORY SERVER 7.1

































































































Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands

Red Hat DIRECTORY SERVER 7.1, Installation Manual

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands