Red Hat DIRECTORY SERVER 7.1 Installation Manual Download Page 44

Page: 44 / 96

Chapter 4. Silent Installation and Instance Creation

Required

[slapd]

Installation Directives

You must provide these directives when you use silent installation with Directory Server.

Optional

[slapd]

Installation Directives

You may provide these directives when you use silent installation with Directory Server.

Table 4-2 and Table 4-3 list the directives.

Required Directive

Description

Components

Specifies the

slapd

components to be installed. The components are:

slapd - Install Directory Server

slapd-client - Install Directory Server

Console

This directive is required. It is recommended that you always install

both components any time you install the Directory Server.

ServerPort

Specifies the port the server uses for LDAP connections. For

information on selecting server port numbers, see

Section 1.2.1

Choosing Unique Port Numbers

. This directive is

required.

ServerIdentifier

Specifies the server identifier. This directive is required. This value is

used as part of the name of the directory in which the Directory Server

instance is installed. For example, if your machine’s host name is

phonebook, then this name is the default, and selecting it causes the

Directory Server instance to be installed into a directory labeled

slapd-phonebook

Suffix

Specifies the suffix that you store your directory data under. For

information on suffixes, see

Section 1.2.5

Determining Your Directory Suffix

. This directive is

required.

RootDN

Specifies the distinguished name used by the directory manager. For

information on the directory manager, see

Section 1.2.4

Defining Authentication Entities

. This directive is

required.

RootDNPwd

Specifies the directory manager’s password. This directive is required.

Table 4-2. Required

[slapd]

Installation Directives

Optional Directive

Description

AddSampleEntries

If set to yes, this directive causes the example.ldif sample directory to

be loaded. Use this directive if you are installing the Directory Server

for evaluation purposes and you do not already have an LDIF file with

which to populate your directory. Default is no.

AddOrgEntries

If set to yes, this directive causes the new Directory Server instance to

be created with a suggested directory structure and access control. If

this directive is used and InstallLdifFile is also used, then this directive

has no effect. Default is

Summary of Contents for DIRECTORY SERVER 7.1

































































































Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands

Red Hat DIRECTORY SERVER 7.1, Installation Manual

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands