Red Hat DIRECTORY SERVER 7.1 Installation Manual Download Page 90

Page: 90 / 96

Glossary

service

A background process on a Windows machine that is responsible for a particular system task.

Service processes do not need human intervention to continue functioning.

SIE

Server Instance Entry. The ID assigned to an instance of Directory Server during installation.

Simple Authentication and Security Layer

See SASL.

Simple Network Management Protocol

See

SNMP

single-master replication

The most basic replication scenario in which two servers each hold a copy of the same read-

write replicas to consumer servers. In a single-master replication scenario, the supplier server

maintains a changelog.

SIR

See

supplier-initiated replication

slapd

LDAP Directory Server daemon or service that is responsible for most functions of a directory

except replication. See also

ns-slapd

SNMP

Also Simple Network Management Protocol. Used to monitor and manage application processes

running on the servers by exchanging data about network activity.

SNMP master agent

Software that exchanges information between the various subagents and the NMS.

SNMP subagent

Software that gathers information about the managed device and passes the information to the

master agent. Also subagent.

Summary of Contents for DIRECTORY SERVER 7.1

































































































Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands

Red Hat DIRECTORY SERVER 7.1, Installation Manual

Search results

Summary of Contents for DIRECTORY SERVER 7.1

Reviews:

Related manuals for DIRECTORY SERVER 7.1

Brands by name

Popular brands