Malfunctions
8
BAL_K32_K42_Z_EN_2V5_BLA_121-006454230
43 / 46
171
Vertical safety bar rotor
blade backwards 3 (SL-
VSR3.2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-VSR32 active
172
Horizontal safety bar ro-
tor blade backwards 4
(SL-FES4.2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-FES42 active
173
Vertical safety bar rotor
blade backwards 4 (SL-
VSR4.2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-VSR42 active
8.1.4
Restarting the door control
NOTICE
In certain cases, the malfunction can be eliminated by performing a restart on the door con-
trol.
Observe the following procedure description and press the corresponding keys.
CAUTION
Danger of knocking
a) Injuries due to dangerous movements in the event of malfunctions or failure of safety devices
are possible.
ð
Make sure that nobody obstructs the turnstile and that no person approaches the system that
could cause the turnstile to rotate!
Procedure
Press key
BDE-D-KTA display
Function
Keep the key pressed until
the display appears.
E
Depending on the mode se-
lected.
Press the key briefly, if no
restart
(No)
is to be per-
formed.
C
Previously set operating
mode.
No restart will be per-
formed. The door will con-
tinue in the preset operating
mode.
Press key briefly, if a restart
(Yes)
should be performed.
E
Reset control is activated.
Turnstile remains at a
standstill. Once complete,
the restart lock will be activ-
ated.
Restart lock is activated.
Turnstile remains at a
standstill.
Remove the restart lock:
Select a desired operating
mode.
Press the key for the de-
sired operating mode
briefly.
The symbol for the operat-
ing mode selected will be
displayed.
The turnstile will start a syn-
chronizing run and rotate
360° at slow speed until it
reaches the home position.
NOTICE
If after restarting the door control an error is still displayed on the control unit, then please
contact your service centre and state the error message displayed on the control unit.
