Servicing and maintenance
7
BAL_K32_K42_Z_EN_2V5_BLA_121-006454230
33 / 46
27
possibly
on the ex-
terior
Function test key pivot
contact SSK
– Select LOCKED mode.
– Turn the key pivot contact briefly.
– Also perform in AUTOMATIC and
CONTINUOUS mode.
– The turnstile will unlock, turn one
complete rotation and lock again.
– The turnstile will turn one complete
rotation.
62,
63,
64,
65
Visual inspection of the
instructions and la-
belling (buttons /
switches)
– Verify that labels and instructions
are present and legible.
– All warnings and instructions must
be present, legible and firmly at-
tached.
70
Visual inspection of
glass labelling
– Verify that all glass labels are
present.
– The glass labels must be present
and attached firmly at eye level.
Visual inspection of
floor mats
– Inspect the floor mats for tripping
hazards, unevenness, damages
and dirt accumulation.
– The floor mat must be free from
tripping hazards, unevenness,
damages and dirt accumulation.
CAUTION
Risk of burning, hot surfaces!
a) Risk of burning hands when replacing components.
ð
Allow components to cool for at least 5 minutes before replacement and wear safety gloves if ne-
cessary.
Visual inspection of the
lighting
– Check that the lamp is firmly
seated and switch on the lighting.
– Lamps must be correctly mounted
and functioning.
WARNING
Resetting the folding turnstile wings
a) Squeezing and retracting the fingers by movements when resetting the hinged turnstile wings
ð
Direct bystanders out of the danger area.
ð
Folding turnstile wings should only be held and moved at the outer edge.
Function test folding
wing
– Press to check whether the hinged
leaves can be opened.
– Check by unlocking whether the
hinged leaves can be opened.
– Folding wings must be correctly
mounted.
– It shall be possible to open top-
hung wings with and without active
emergency stop.
7.3
Cleaning and care
DANGER
Warning: risk of fatal electric shock!
a) Risk of death by electric shock
ð
Do not touch the drive system while the main power is connected.
ð
Do not spray water into the drive system.
NOTICE
If available, select the MANUAL operating mode before starting cleaning and additionally
press an emergency stop switch.
