8
Malfunctions
38 / 46
BAL_K32_K42_Z_EN_2V5_BLA_121-006454230
116
Safety edge outside
drum edge (SL-TRKA)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-TRKA active
117
Horizontal safety bar ro-
tor blad 1 (SL-FES1)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-FES1 active
118
Vertical safety bar rotor
blade 1 (SL-VSR1)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-VSR1 active
119
Horizontal safety bar ro-
tor blad 2 (SL-FES2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-FES2 active
120
Vertical safety bar rotor
blade 2 (SL-VSR2)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-VSR2 active
121
Horizontal safety bar ro-
tor blad 3 (SL-FES3)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-FES3 active
122
Vertical safety bar rotor
blade 3 (SL-VSR3)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-VSR3 active
123
Horizontal safety bar ro-
tor blad 4 (SL-FES4)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-FES4 active
124
Vertical safety bar rotor
blade 4 (SL-VSR4)
– SafetyStop, Immediate stop
of the rotation
– Remove object from safety edge, possibly
dirt on the floor, under a heel guard
– Perform reset
– If not successful, contact service
SL-VSR4 active
125
Fire alarm contact
(BMZ)
– Immediate stop of the rota-
tion
– Release of the escape route
via HST200
– Check / replace onsite switching contact
– Perform reset
– If not successful, contact service
Fire alarm
126
Night shutter not open
or drum wall breakout
not closed (UW-
POS1_S)
– Immediate stop of the rota-
tion
– Fully open the night shield
– Close / reset drum wall breakout com-
pletely
– Reset pivot wings
– Perform reset
UW-POS1 stator active
