background image

Options

4

BAL_K32_K42_Z_EN_2V5_BLA_121-006454230

25 / 46

By pressing the door open button, or using the turn key switch or on-site code card reader, the night
shield will unlock and open up completely.

Once the night shield is completely opened, the turnstile will start, turn one complete rotation at slow
speed and come to a standstill in the home position.

Then the night shield closes again automatically and locks.

In the operating modes AUTOMATIC, CONTINUOUS and MANUAL, the night shield unlocks itself,
opens automatically and remains open. If switched to the LOCKED operating mode, the night shield
closes again automatically.

Security sensors:

 if the detection area of the security sensors is entered during the closing process,

the night shield will open (reverse) immediately. If no security sensors are activated the night shield
will close and lock automatically.

Collision detection:

 if the night shield wing strikes an obstacle during the closing process, the night

shield will stop and open again. The next attempt to close will start from the obstruction area at slow
speed.

The night shield will also stop, if its wing strikes and obstacle during the opening process. The next at-
tempt to open will start at slow speed.

Summary of Contents for K 32 Z















































Reviews: