Recon MOD Live User Manual Download Page 6

Page: 6 / 80

Page 6

MOD Live User Manual

Version 1.1

www.reconinstruments.com

Charge Up Mod Live

To fully charge MOD Live using an AC adapter:

Make sure MOD Live is turned off before you start.

Assemble the AC adapter by inserting the North American

or European plug.

4. Insert the large plug of the USB cable into the adapter port.

5. Pop open the cover of MOD Live’s USB port. Tip: the port

cover shows a tiny image of a USB cable. Insert the smaller

plug into MOD Live’s USB port. Check that the plug’s 7L

lettering appears on the outside of the goggle.

6. Plug the adapter into a power outlet. When MOD Live

begins charging, a red light appears directly above the

USB port. If the battery was drained after the unit left the

factory, it can take up to 3 hours for the battery to become

fully charged.

7. After the red light disappears, disconnect the adapter.

Remove the USB cable from MOD Live.

Replace the plastic USB port cover to ensure the port is

protected from rain, snow and ice.

NOTE: Always use the Recon AC adapter and USB cable shipped with your unit.

Never use third-party cables or adapters.

Summary of Contents for MOD Live
















































































Search results

Summary of Contents for MOD Live

Reviews:

Related manuals for MOD Live

Brands by name

Popular brands

Recon MOD Live, User Manual

Search results

Summary of Contents for MOD Live

Reviews:

Related manuals for MOD Live

Brands by name

Popular brands