Recognition Systems HandPunch 50E, Manual

Page: 31 / 58

HandPunch 50E Manual
Page 29
Programming the HandPunch
The HandPunch is programmed via a series of command menus. A
summary of the menus and commands is given in Table 3.
To control access to the command menus, each menu has a unique
password. This password is requested as a part of the process for
accessing each menu. A supervisor must enter the correct password for
that menu to access that menu. The default menu passwords are given
in Table 3.
To increase the security of the HandPunch, Recognition Systems
recommends changing the passwords for the command menus to new
numbers. These password numbers can be up to 10 digits long. This is
done through the software.
Authority Level
A second method for controlling access to the command menus is
through the use of Authority Levels. Authority Levels control whether or
not a user has access to the command menus.
• Level 0 is for a user who does not need access to any of the
command menus.
• Level 5 is assigned to Supervisors who need access to all of the
command menus.
The HandPunch automatically assigns Authority Level 0 to users
enrolled by the Add Employee command. Authority Level 5 is
Table 3: Basic Command Mode Structure
Service Menu Setup Menu Management
Menu Enrollment
Menu Security Menu
Password 1 Password 2 Password 3 Password 4 Password 5
Calibrate Set Language List Users Add Employee Special Enroll
Status Display Set Date For-
mat Set User Data Add Supervi-
sor
Set Time and
Date Remove User
Set ID Length
Set Serial