Recognition Systems HandPunch 50E, Manual

Page: 33 / 58

HandPunch 50E Manual
Page 31
System Management
Once a HandPunch system is in operation the following commands are
used for system management.
List Users – List the Users authorized to use a HandPunch. This is
done through the Management Menu. The instructions for listing
employees begin on page 39.
Set User Data – Set a user’s reject threshold (adjusting the sensitivity
applied when a HandPunch reads a hand) this task is done through
the Management Menu. The instructions for setting user data begin
on page 39.
Will be overwritten if User Data is controlled by the
software!
Remove User – Remove employees (and supervisors) from a
HandPunch. This is done through the Enrollment Menu. The
instructions for removing employees begin on page 44.
Chances are
this should be done through the host software!