Recognition Systems HandPunch 50E, Manual

Page: 23 / 58

HandPunch 50E Manual
Page 21
Erasing the Memory
The erase memory function allows a HandPunch’s setup and/or user
database to be erased.
There are two options when erasing the memory from the HandPunch.
1. Setup
2. All
Choosing the erasing of the setup will set the HandPunch’s address,
passwords, etc. back to factory defaults.
Choosing the All option will take the HandPunch’s setup back to factory
defaults plus erase all user databases and datalogs. This action can not
be undone. If there is a software that is managing the system then the
users can be downloaded back to the HandPunch if needed.
Erasing
HandPunch
Memory Perform the following steps to erase the setup programs but retain the
user database.
1. With system power OFF, depress reset switch. (See figure 4-1 on
page 17 to locate switch.)
2. Turn system power ON and wait 5 seconds.
3. LCD screen will display
ERASE :1 SETUP
:9 ALL!!!