22
RealCareer® Welding Solutions – guideWELD® LIVE real welding guidance system
Troubleshooting
(continued)
Helmet Angle Sensor Calibration
The Angle Sensor will need to be calibrated before each weld.
1. If calibration screen 1 appears inside the Work Angle (right top screen) and Travel Angle
(left top screen) screens, the Angle Sensor must be recalibrated (see calibration process)
NOTE:
Once Calibration has been completed, the calibration will stay for up to three
minutes. After three minutes, the guidance technology accuracy may start to drift. This drift
may cause inaccuracies in the welding guidance system
and only through recalibration of the angle
sensor will these inaccuracies
be resolved.
1
1
