11
RealCareer® Welding Solutions – guideWELD® LIVE real welding guidance system
Angle Sensor Calibration
(continued)
5. Grasp the welding gun in the desired holding position, pivot handle down and hold
6. Press and release the calibration button on the Speed Sensor, the calibrating screen will
display in the Helmet. Wait for first part of the calibration to complete before continuing
7. Pivot the welding gun handle up and hold
8. Press and release the calibration button on the Speed Sensor, the calibrating screen will
display in the Helmet. Wait for first part of the calibration to complete before continuing
9. When calibration has completed, the in-helmet indicators
will display*
10. Remove the welding gun and start the weld without
adjusting the position of the Angle Sensor on
the welding gun
* The Speed Guidance Display will not show until a weld has started. The Speed Sensor needs to detect
an arc before turning on speed guidance.
8
6
9
Work Angle (45)
Speed
Travel Angle (10)
