Real Flame VEKTOR 1100, Installation & Operating Manual

Page: 27 / 56

27
DOOR REMOVAL AND FITMENT
(continued)
DOOR FITMENT (RECOMMENDED 2 PERSONS)
• Check door glass and seal is sitting in frame correctly Door rope should be
sitting around the glass perimeter. The glass with door rope sits flush in the
frame.
Robax inner glass
Door rope seat
Door metal frame
• Lift door carefully, supporting both the glass and frame. Hold vertically and
gently lower down onto the lower support bracket.
• Tilt door back and check all bolt holes line up. Slide door sideways to correct
where required. DOOR MUST BE SUPPORTED AT ALL TIMES.
• Fit all screws loosely. Once all fitted hand tighten. Do not overtighten
screws.