MAINTENANCE AND CLEANING
9
The unit must be cold before starting any form of maintenance or cleaning.
The glass can be removed and cleaned using standard window cleaner. Be careful not to scratch
the rear of the glass which has a black screen print on it.
To clean the weather cover, warm soapy water should be used.
Cleaning of the burners and ceramic stones can be carried out using a brush and a dry cloth and
should be done at least annually. This will remove carbon or soot build-up. Periodically the pilot
and burners should be checked visually for carbon and soot build-up, a consistent flame and
clean burning.
Fascia:
The Fascia is the visible surround of your Real Flame IO1000 Gas Fireplace and must be treated
carefully to prevent unsightly marks from tarnishing the visual quality of the product. Some
marking over time is inevitable however, so the following directions will assist you in getting the
maximum enjoyment from it.
NEVER EVER RUB THE FASCIA.
The outside of a Real Flame Fascia must only be cleaned with a soft microfibre cloth. If heavier
cleaning is required for the likes of grease or stubborn fingerprint removal we recommend the use
of Steel Kleen brand Ezi Wipes for stainless steel fascias only, and warm soapy water for powder
coated Fascias. These wipes have been tested and produce very satisfying results, when used
correctly. For heavier marks, try the following:
For Stainless Steel Fascias:
•
Products such as Steel Kleen ezi wipes applied to the fascia gently in the direction of the
grain have been tested and produce satisfying results when used correctly.
For Powder Coated Fascias:
•
Use warm soapy water and a clean soft microfibre cloth to gently clean any marks.
PILOT FLAME AND BURNER POSITIONING
Summary of Contents for EXURO IO1000
Page 22: ...ELECTRICAL SCHEMATIC 22...
Page 23: ...EXPLODED VIEW 23...
