Initial configuration
If your system boots to the Hardware Configuration screen, then Initial Config is already configured and you
can skip to
. Otherwise, continue to Step 1.
After reading and accepting the EULA, you will see the network selection screen. Select the type of
network that you would like to use or tap
SKIP
if you do not want to configure a network at this time. You
can revisit and change your network settings at any point after your system is configured.
Cellular
Your Forge/Ctrl comes with an internal cellular modem. If you do not know your facility's
wireless settings and want to connect to a network, select
CELLULAR
.
Wireless
If you select
WIRELESS
, you will need to enter the wireless network name (SSID) and
password.
Wired
If you select
ETHERNET
, you can connect your Forge/Ctrl to the internet by using the
WAN Ethernet port on the Forge/Ctrl.
Note:
The importance of connecting to the network is to be able to send notifications during the
automation process. Also, it helps with communicating any issues to READY that you might
encounter.
1
© 2020 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
