4. Description of the RPCM Device
Figure 4.3.2. General scheme of the command line interface.
The built-in help is invoked by the
help
command.
After entering the
help
command, the system displays the available commands:
RPCM Commands description:
exit - exit from command line interface
help - show this help
add-add configuration for rpcm subsystems: snmp, etc.
delete - delete configuration elements for rpcm subsystems: snmp, etc.
restart - restart outputs, internal-controller and interface-controller
set - set outputs on / off, input parameters, beeper, etc.
show - show inputs, outputs, snmp, etc. information
version - show system software version and system time
quit command line interface
Type 'help' to get suggestions
To get information on each individual command, you must enter the command name and the ser-
vice word
help
or the question mark
?
For example, to get information about the available functions of the
set
command, enter:
set help
or
set?
The returned description of resulting from the
set
command:
PCM Commands description:
set action-confirmation - set confirmation of actions for the web interface
enabled to enabled (will double check dangerous actions)
disabled to disabled
set all inputs - set input force failback
force failback configuration (available on RPCM1502/RPCM1532)
delay set stabilization delay
53
