2. Attach an adapter/charger or charged battery.
A. Adapter/Charger
DC Power
Cord,
To AC
Hz
\
POWER
Indicator
B. Charged Battery*
--
1 .
2 .
3 .
Connect one end of the DC power cord
to the
DC OUT
jack on the adapter/
charger and the other end to the
DC IN
on the camcorder.
Plug in the adapter/charger. The
adapter/charger’s
POWER
indicator
will light.
Details are on page
18.
Make sure
POWER
is in
OFF.
Match the lines on the battery and
camcorder.
Hold the battery flush against the
camcorder, and slide it in the direction
of the arrow until it locks into place.
* The battery must be charged before it can be used
the first time.
Details are on page 19.
3. Attach the shoulder strap.
A. Unfasten one end of the shoulder strap from
C. Thread the strap back into the buckle. Pull on
the buckle. Leave the buckle on the strap.
the strap and make sure it is securely fastened
before using it to support the camcorder.
B. Thread one end of the shoulder strap through
one of the shoulder strap rings.
Shoulder
Strap Rings
D. Repeat steps A-C for the other end of the
shoulder strap.
(continued on next page)
11
