General
Power requirement:
DC
Power consumption: 5.0 W
Weight: 1.7 lbs. (780g)
Dimensions:
x
x
(117x
Video Recorder Section
Format:
Record/Playback System:
Two video record/playback heads
One flying erase head
Headwheel Cylinder Diameter: 40 mm
Video Signal: EIA Standard NTSC Color
Camera Section
Scanning: 525 Lines/60 Fields/30 Frames
Image Sensor:
high-resolution,
solid-state CCD Imager
Tripod Mount: One
threaded hole
Lens: fl.8
8:
1 (6-48mm)
Diameter: 37 mm
Earphone Jack: Monaural 8 ohm mini jack
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
l
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and
receiver.
l
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
l
Consult the dealer
or
an experienced radio/TV
technician for help.
Alterations or modifications carried out without
appropriate authorization may invalidate the user’s
FCC right to operate the equipment.
