background image

In addition to the careful attention devoted to quality standards in the manufacture of your product, safety is a
major factor in the design of every instrument. However, safety is your responsibility too.

These pages list important information that will help to assure your enjoyment and proper use of a camcorder.
adapter/charger, and accessory equipment. Please read them carefully before operating your products.

Installation

1 .

2 .

Read and Follow Instructions-All 

the safety and

operating instructions should be read before the

product is operated. Follow all operating instructions.

Retain Instructions--The 

safety and operating

instructions should be retained for future reference.

3 .

4 .

Heed 

Warnings-Comply with all warnings on the

product and in the operating instructions.

Polarization-This 

product is equipped with a

polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into 

 outlet,

try reversing the plug. If the plug still fails to fit,

contact your electrician to replace your obsolete outlet.
To prevent electric shock, do not use this polarized
plug with an extension cord, receptacle, or other outlet
unless the blades can be fully inserted without blade

exposure. If you need an extension cord, use one with
a polarized plug.

5 .

6 .

Power 

Sources-This product should be operated only

from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local
power company. For products intended to operate
from battery power, or other sources, refer to the
operating instructions.

Overloading-Do 

not

overload wall outlets,
extension cords, or integral
convenience receptacles as
this can result in a risk of
fire or electric shock.
Overloaded AC outlets,
extension cords, frayed
power cords, damaged or cracked wire insulation, and
broken plugs are dangerous. They may result in a
shock or fire hazard. Periodically examine the cord,
and if its appearance indicates damage or deteriorated
insulation, have it replaced by your service technician.

Power-Cord Protection-Power-supply 

cords should

be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

product.

9 .

10.

11.

 

and openings in the products are

provided for ventilation to ensure reliable operation
of the product and to protect them from overheating.
These openings must not be blocked or covered. The
openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the product manufacturer’s
instructions have been followed.

Attachments-Do 

not use attachments unless

recommended by the product manufacturer as they

 cause hazards.

Water and Moisture-Do 

not use this product near

water-for example, near a bath tub, wash bowl,

kitchen sink or laundry tub, in a wet basement, or

near a swimming pool and the like.

Accessories-Do 

not place this product on an

unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult as well as serious damage to the product. Use
this product only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer or sold

with the product. Any mounting of the product

should follow the manufacturer’s instructions and use
a mounting accessory recommended by the
manufacturer.

 

A product and cart

combination should be moved
with care. Quick stops,
excessive force, and uneven

surfaces may cause the
product and cart combination
to overturn.

Summary of Contents for PRO808A

















































Reviews: