background image

To order accessories, contact your local dealer, call
toll free, or use the order form 

 the 

 Soft Carrying Case

Custom compact soft
case designed
especially to provide
protection and utility
for your 
camcorder and most
accessories. Rugged
fabric lined with soft

non-abrasive material and generous padding. Has
three outside pockets with storage for lens filters,
adapters, batteries, and tapes.

Rechargeable Batteries

These rechargeable
nickel-cadmium
batteries are
specifically designed
for long life. The
AV608 can power
your camcorder up to

one hour, and the

 up to two hours (depending on how much

you use zoom and pause). Both can be recharged
with the AC adapter/charger that came with your
camcorder.

DCCOS Car Cord Adapter/Charger

This car cord
adapter/charger enables
you to operate your
camcorder from your
car, truck, or RV by
plugging the car cord
directly into the
vehicle’s cigarette
lighter socket. It will

also charge the 

 battery supplied with the

camcorder or the 

 long play battery. The

 is specially designed to convert power from a

24-volt or 12-volt battery to a 6.5 volt output.

 Color Enhancement Light

This ultra compact E-watt video
light is cordless, light in weight, and
includes a rechargeable battery. It
mounts on the top of the camcorder

and fits 

on 

a standard accessory shoe. The VDC88

provides excellent soft, lush fill light. It uses one

 

 replacement bulb. The recharge-

able battery BP1000 can be charged with the
VDC085 battery charger.

VCClOOO Video Color Control Center

The 

VCClOOO is two

accessories in one. The color
control center lets you adjust
the color intensity, tint, white

balance, and sharpness of tapes being dubbed. This
is especially helpful when the original tape was
produced in poor lighting conditions or poor color
settings. The second feature, the character generator,
lets you create titles that can be recorded on your
tapes. This lets you add a professional and/or
personal touch to your home videos.

 RF Output Adapter

This adapter is used with coaxial RF

cable 

 or 

 to

connect your camcorder to a standard
TV (one without audio/video input

jacks) for playback. If your antenna cable is the flat

twin-lead type attached by two screws, you will also

need a 300-75 ohm transformer, such as 193983. If

your TV has 300 ohm VHS screw terminals, you

will need an optional 75-300 ohm transformer, such

as 

Coaxial RF Cables

 

 

These RF cables are used with the CRF800 RF
output adapter to connect your camcorder to a
standard TV (one without audio/video input jacks)
for playback.

If your antenna cable is the flat twin-lead type
attached by two screws, you will also need a 300-75
ohm transformer such as 193983.

If your TV has 300 ohm VHS screw terminals, you
will need an optional 75-300 ohm transformer such
as 

Summary of Contents for PRO808A

















































Reviews: