• May be a weak station. Change STEREO/SAP function to MONO setting
instead of STEREO.
• Maybe someone changed CABLE/AIR function to wrong position.
• Maybe a vacant channel is tuned.
• For Channels 90, 91, and 92, make sure the component connected to those
INPUT jacks is turned on in order to see picture.
• If watching VCR (connected only through antenna input), make sure TV is
tuned to channel 3 or 4–same as CH3/CH4 switch on VCR. Also check to
make sure TV/VCR switch on VCR is in correct position.
• Check antenna connections.
• Try adjusting SHARPNESS function to improve weak signals.
• Try another channel.
• Try adjusting VOLUME, BASS, and TREBLE controls.
• If station is sending stereo, try changing STEREO/SAP function to MONO
setting for clearer sound.
• Try adjusting SRS function to turn SRS on or off.
• Make sure STEREO/SAP function is in STEREO mode.
• One channel must come thru ANT A or B jack and the other channel must
come thru the INPUT 1 or 2 jacks.
• If using the VCR1 or VCR2 button, make sure it is programmed to select the
proper video input channel as described on page 22.
• If using an S-VHS component, make sure its regular VIDEO cable is
connected to INPUT 1 VIDEO jack on the TV.
• If using a VCR, make sure the AUDIO and VIDEO OUT jacks on the VCR
are connected to the TV’s AUDIO and VIDEO IN jacks.
• If you have an S-VHS VCR (or camcorder) connected, you must also
connect a cable from the VCR’s VIDEO OUT jack to the TV’s corresponding
VIDEO IN jack in addition to the S-VHS cable.
• The small picture will not have color if the large picture signal does not have
the color burst reference. All color signals and some black-and-white signals
are sent with color burst information. Try changing channels of the large
picture.
• You may have to reprogram the proper code into the remote if you change its
batteries. Try not to press any buttons on the remote while changing its
batteries.
• Try adjusting the PICTURE TILT switches on the back of the TV.
Details are on page 3.
Noisy stereo reception
No picture, no sound but power light
is on
Sound okay, picture poor
Picture okay, sound poor
No stereo on known stereo station
Can’t get two channels in pix-in-pix
No picture while using pix-in-pix,
with S-VHS VCR or camcorder
Small picture does not have color.
Remote no longer controls cable
box,VCR, or audio equipment.
Picture appears tilted.
Trouble Checks and Adjustments
Trouble Checks
(continued)
45
