7.
Adjust
PICTURE TILT switches if necessary.
This model has an extra large
color picture tube. The effects of
geomagnetism (Earth’s magnetic
field) may cause the picture to tilt
slightly. The POLARITY and
STRENGTH switches on the back
of the TV let you compensate for
this effect. If the picture appears
tilted, follow these steps to
improve it.
1. Make sure the STRENGTH switch is in the OFF position
as the diagram shows.
2. Move the STRENGTH switch to the LOW position. If this
improves the tilt but it is still not satisfactory, move the
STRENGTH switch to the HIGH position. This should
correct the situation. If moving the STRENGTH switch
makes the tilt worse, go to the next step.
3. Change the position of the POLARITY switch. If this
improves the tilt but it is still not satisfactory, move the
STRENGTH switch to the HIGH position. This should
correct the situation.
You may need to reset the POLARITY and STRENGTH
switches if the TV is moved or repositioned in the room,
especially if the TV will be facing a different direction.
8.
Set the clock.
1. Repeatedly press the MENU button to select the SETUP
MENU and then press +. Press MENU repeatedly again to
select the CLOCK SET display.
VCR 1 CHAN: 91
VCR 2 CHAN: 92
CABLE/AIR: CABLE
CABLE CHAN: 12
CLOCK SET:-HR +MIN
12:00AM 12
9.
Review menus.
1. To see the video menu,
repeatedly press MENU button to
select VIDEO MENU and then
press +. Repeatedly press
MENU to select desired function
and then press + or – to adjust it.
Details are on page 12.
2. To see the audio menu repeatedly press MENU to select
the AUDIO MENU and then press + or – to adjust it.
Details begin on page 13.
3. To see the setup menu,
repeatedly press MENU to
select SETUP MENU and
then press +. Repeatedly
press MENU to select
desired function and then
press + or – to adjust it.
Details begin on page 15.
10.
Review other features.
Later, after you feel comfortable with your TV and remote
control, you can review the detailed control descriptions and
special features covered in this manual.
You can use the rest of this manual as a reference guide to
review detailed information about each operating control
and function. The alphabetical index in the back will help
you quickly locate desired information.
SET ALARM
ANTENNA: A
CHAN LABEL
SLEEP TIMER 0:00
PARENTAL CTRL: OFF
CHAN CTRL: NORMAL
VCR 2 CHAN: OFF
CHAN MEM: STORED
CABLE/AIR: CABLE
VCR 1 CHAN: OFF
CLOCK SET -HR +MIN
DEMO:PRESS + ON TV
CABLE CHAN: OFF
AUTOPROGRAM
First-Time Operation
(continued)
3
AUDIO MENU
MUTE
VIDEO MENU
SETUP MENU
VCR 1 CHAN: 91
VCR 2 CHAN: 92
CABLE/AIR: CABLE
CABLE CHAN: 12
CLOCK SET:-HR +MIN
12:00AM 12
+
–
HIGH
LOW
OFF
POLARITY STRENGTH
PICTURE
TILT
BASS - +
STEREO/SAP: STEREO
SRS: ON
......... .........
BAL - +
......... .........
TREBLE - +
......... .........
SRS WIDTH: ENHANCE
SPEAKERS: ON
SETUP MENU
MUTE
VIDEO MENU
AUDIO MENU
AUDIO MENU
SETUP MENU
MUTE
VIDEO MENU
TINT - +
BRIGHT - +
SHARP - +
......... .........
CONTR - +
...................
COLOR - +
......... .........
......... .........
...................
PICTURE RESET
VCR1
VCR2
CABLE AUDIO
OFF
ON
TV
1
2
3
4
5
6
7
8
9
0
INPUT
CS
PC
MUTE
MENU
–
+
ANT
PROG
CLEAR DISPLAY
PLAY
PAUSE
STOP
REWIND
FF
RECORD
PIP
OFF SWAP
ZOOM OUT
CHAN FRZ
GUIDE
CHANNEL
VOLUME
ID
SRS( )
•
–
+
MENU
AUDIO MENU
MUTE
VIDEO MENU
SETUP MENU
2. Press and hold the – button to select the correct hour
(including AM or PM). Press and hold the + button
to select the correct minute. The correct time will
now appear on the screen whenever you change
channels or press the TV or DISPLAY button.
Note: If power is interrupted for an extended time, you
will need to reset the clock.
