Video Input Channel Variations
Button/Switch
Button on the
Channel
on the TV
TV remote
Number
VIDEO
VID1
S-VID
00
93
SIGNAL
LINE
INPUT
90
VID 1
VID 1
VID
SOURCE
91
VID 2
VID 2
VIDEO AUX
92
INPUT
Connections and Setup
9
How to find your TV’s Video Input Channel
In order to see what’s playing on your DVD Player, you need to tune the TV to the Video Input
Channel that corresponds to the jacks you used to connect the DVD Player to the TV.The Video
Input Channel(s) varies for different brands and different models of TVs. If your TV is an RCA, GE,
or Proscan brand, the DVD’s remote probably operates it. Just press the TV button, and then
press the INPUT button until you see the DVD’s main menu, screen saver, or the disc you’re
playing. If your TV is another brand, check the list below:
Consult the instruction manual that came with your TV.
If you can’t find the information in the manual, or can’t find the manual, review the following list.
•
There might be a button on the TV’s remote control that accesses the Video Input Channel
(see table below for examples).
•
You might select the Video Input Channel from the TV’s on-screen menu system.
•
You might tune to it by pressing a specific channel number (see table below).
•
Press the Channel up and/or down buttons on the TV’s remote control (sometimes the Video
Input Channel is stored in your TV’s channel list).
Next Steps
Before you start playing discs, you might want to get familiar with the remote control –
Chapter
2
has details. Playing Discs is found in
Chapter 3
; the menu system is outlined in
Chapter 4
; and
Chapter 5
contains troubleshooting, Limited Warranty, and accessory information.
DRC240.body 3/16/04 11:41 AM Page 9
