RCA d52w14, User Manual

Page: 20 / 48

18 Chapter 2
Using the Remote Control
Chapter 2 19
Using the Remote Control
Note:
The DVD and AUX•HD buttons also turn on
most RCA, GE, and Proscan products.
Tip
To turn off all the RCA, GE, and Proscan
components that are connected to the TV,
press ON•OFF twice within two seconds.
This feature only works with most RCA, GE,
and Proscan products.
GO BACK Returns you to the previous channel.
GUIDE Brings up the Channel Guide menu.
Indicator Indicates the programming mode when programming the remote to
control components. The indicator lights up when you press a valid button on
the remote. It flickers when the remote batteries are low and you press a button.
INFO Brings up channel banner; press again to clear the screen.
INPUT Press to toggle through the available input sources (VID1, VID2, FRNT
and CMP1—press the CH+ or CH- button to resume TV viewing).
MENU
Brings up the Main menu.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore
the volume.
OK When in the menu system, selects highlighted items. When watching
TV, freezes the picture until you press any button on the remote to resume
normal TV viewing. Please note that when you "unfreeze" you go back to live
programming (skipping any programming that occurred during the freeze).
ON•OFF When in TV mode, turns the TV on and off. If in another component
mode (DVD or AUX•HD) and programmed, will turn the component on and
off. When pressed twice within two seconds, the ON•OFF button turns off most
RCA, GE and Proscan components.
PRESETS Displays the Picture and Sound preset settings. Use the up and down
arrow buttons to highlight either Picture or Sound settings. Use the left and right
arrow buttons to change to a different Picture or Sound preset.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed,
provides transport control for some remote-controllable VCRs and DVD players.
SLEEP
Displays the Sleep Timer. Each press adds an additional 15 minutes.
SKIP Press once before changing channels and the TV will wait 30 seconds
before returning you to the original channel. Press repeatedly to add more time.
TV Turns on the TV and puts the remote in TV mode. Also displays current
status.
VOL – or VOL + Decreases or increases the TV’s volume.
Tip
The indicator flashes when the remote
batteries are low and you press a button on
the remote.
A warning banner may also appear on the
screen when you press a remote button and
your batteries are low.