Connections & Setup
16
Chapter 1
Auto Convergence
Your TV’s picture tubes might have been disturbed during delivery or after you
moved the TV, causing the color in your TV to be out of alignment. The colors
adjust by starting auto convergence.
IMPORTANT:
Auto convergence works best once the TV has warmed up for
at least an hour. If you've just unpacked your TV, it's a good idea to repeat
the Auto convergence function when the TV's been running for at least an
hour. See page 38 for more information about Auto convergence.
1. Press OK to begin auto convergence.
2. When the auto convergence is complete, the
Red center convergence
menu
appears. The cross in the middle of the screen should be yellow. If it is not,
use the arrow buttons to move the red cross to overlap the green cross. Press
OK when adjustments are complete.
3. The
Blue center convergence
menu appears with a cyan cross in the middle
of the screen. If it is not, use the arrow buttons to move the blue cross to
overlap the green cross. Press OK (the TV tunes to the last selected/available
channel in the channel list).
Note:
If you're using an HD source (such as an
HDTV tuner or HDTV satellite receiver) on
the CMPNT input, you should run Auto
convergence separately for that input as well.
Tune to the input you’re using for the HD
source, then go to page 38 for information on
Auto convergence.
Summary of Contents for d52w14
Page 1: ...HDTV Monitor User s Guide Changing Entertainment Again ...
Page 8: ...Connections Setup 6 Chapter 1 HDTV Tuner 1A 3 4A 5A 5B 1B 4B 5C 4C 6A 6B VCR TV DVD 2 ...
Page 10: ...Connections Setup 8 Chapter 1 Satellite 1A 1B 2 3B VCR TV 1C 3A 3C ...
Page 12: ...Connections Setup 10 Chapter 1 1A 2A 2B 3 DVD 1B 2C VCR TV ...
