RCA 25450 Page 93 User Manual Download

Page: 93 / 124

1. Press the

soft button.

“Sound”

appears on the display.

3. Press the

soft button.

4. Press

on the

Navigation

button to scroll through the options until

“Key volume”

appears on the display.

5. Press the

soft button.

6. To increase the button volume, press

on the

Navigation

button.

7. To decrease the button volume, press the

on the

Navigation

button.

8. The display will show the volume level (

“High, Medium (Default), Low, Off”

9. To accept the volume setting shown on the display, press the

soft

button.

Key Tone (Base Unit)

The key tone can be changed using the menu system. There are four different key

tones with key tone 1 the default. The selected key tone will remain in effect for

future phone calls until changed.
1. Press the

soft button.

“Sound”

appears on the display.

3. Press the

soft button.

4. Press

on the

Navigation

button to scroll through the options until

“Key tone”

appears on the display.

5. Press the

soft button.

6. Press

on the

Navigation

button to change the key tone.

Medium (Default)

Settings and Adjustment

Summary of Contents for 25450





























































































































Search results

Summary of Contents for 25450

Reviews:

Related manuals for 25450

Brands by name

Popular brands

RCA 25450, User Manual

Search results

Summary of Contents for 25450

Reviews:

Related manuals for 25450

Brands by name

Popular brands