RCA 25450 Page 88 User Manual Download

Page: 88 / 124

Base Unit Setup

Flash Time

Flash time is the amount of time the phone needs to switch between lines. The flash

time function allows the user to adjust the length of time (100 ms–1000 ms select-

able, with 600 ms as the default). The flash time requirements may vary by country

and service provider.
1. Press the

soft button.

2. Press

on the

Navigation

button to scroll through the options until

“System setting”

appears on the display.

3. Press the

soft button.

“Flash time”

appears on the display.

5. Press the

soft button.

6. The display will show a range of values from 100 to 1000.
7. Press

on the

Navigation

button to scroll through the options and

choose the desired flash time.

8. Press the

soft button.

Administrator Password

The administrator password can be changed using this function.
1. Press the

soft button.

2. Press

on the

Navigation

button to scroll through the options until

“System setting”

appears on the display.

3. Press the

soft button.

4. Press

on the

Navigation

button to scroll through the options until

“Admin password”

appears on the display.

System setting

Settings and Adjustment

Summary of Contents for 25450





























































































































Search results

Summary of Contents for 25450

Reviews:

Related manuals for 25450

Brands by name

Popular brands

RCA 25450, User Manual

Search results

Summary of Contents for 25450

Reviews:

Related manuals for 25450

Brands by name

Popular brands