RCA 25450 Page 105 User Manual Download

Page: 105 / 124

3. Press the

soft button.

4. Press

on the

Navigation

button to scroll through the options until

“Set time”

appears on the display.

5. Press the

soft button.

6. Using the keypad, enter a two-digit month, date, hour, and minute. Press

and

on the

Navigation

button to move the cursor under the digit or letter to be

changed. Press the

soft button to start over.

7. To accept the time and date setting, press the

soft button.

8. Press

on the

Navigation

button to select

“AM”

“PM”

9. Press the

soft button.

Do Not Disturb (DND) (Base Unit)

The ringer and intercom can be turned off using the Do Not Disturb function.

Base Unit

1. Press the

DND

button to turn off the ringer. Press the

DND

button again to

turn on the ringer. The DND button flashes when DND is on.

“DND enabled”

also

flashes on the display.

2. To turn off the ringer from the menu system, press the

soft button.

“Sound”

appears on the display.

4. Press the

soft button.

“Ring volume”

appears on the display.

6. Press the

soft button.

Settings and Adjustment

Summary of Contents for 25450





























































































































Search results

Summary of Contents for 25450

Reviews:

Related manuals for 25450

Brands by name

Popular brands

RCA 25450, User Manual

Search results

Summary of Contents for 25450

Reviews:

Related manuals for 25450

Brands by name

Popular brands