Voice Mail (VM)
The Base Unit and every Cordless Handset connected to the system has its own voice
mailbox. Each Cordless Handset has a mailbox number that is the same as it’s ID/ex-
tension number. The Base Unit has the mailbox number “00”. The system can hold up
to 100 minutes of messages with each message having a limit of 64 seconds.
NOTE:
The default password is “0000”. Use this password when setting up voice mail for the
first time, or after the password has been reset by the administrator.
Configure Voice Mail (Base Unit)
1. Press the
Voice Mail
button.
2. Press
5
or
6
on the
Navigation
button to scroll through the options until
“Configure VM”
appears on the display.
3. Press the
soft button.
4. Press
5
or
6
on the
Navigation
button to scroll through the options to select
which line to configure for voice mail. Auto attendant must be turned off to
change the configuration. The display will show
“VM can only be configured
when AA is off”
if auto attendant is on.
5. Press the
soft button.
6. The display will show whether voice mail is on and the number of rings before
caller is directed to voice mail.
7. To change configuration, press the
soft button.
8. First select
“On (Default)”
to enable or
“Off”
to disable.
9. Press the
soft button.
10. If voice mail is on, the display will prompt the user to select number of rings be-
fore the caller is directed to voice mail. Press
5
or
6
on the Navigation button,
make selection (2–6).
Voice Mail
0
