17
Dial Mode
(only applicable for base)
The Dial Mode of Line 1 and Line 2 can be set separately.
From the Phone Setting Menu:
1. Press the
vol
(- or +) button to scroll to the
Dial Mode
.
2. Press
SELECT
Soft key.
3. Use the
vol
(- or +) button to select
Tone
or
Pulse
and use the
DIR
or
CID
button to
select L1 or L2.
4. Press
SELECT
Soft key to save your selection and the screen displays
Saved
.
NOTE: The Dial mode only can be set in the base menu.
Area Code
(only applicable for base)
The telephone uses the pre-programmed area code to determine the number format to
display when a valid Caller ID record is received. The pre-programmed area code is also
used for the Dialback feature.
From the Phone setting Menu:
1. Press the
vol
(- or +) button to scroll to the
Area code
.
2. Press
SELECT
Soft key.
3. Use the touch-tone pad to enter your 3-digit area code.
4. Press
SAVE
Soft key to save your selection and the screen displays
Saved
.
Registration
(only applicable to handset)
A cordless handset will not operate until it is registered to the base. During the registration
process, keep the handset near the base. Up to 10 cordless handsets can be registered to
one base.
NOTE: If a handset has not been registered to the base, then the display
will show
PRESS REG TO INITIATE REGISTRATION
once the handset has been
activated. Press the REG Soft key to start the registration.
From the Phone Setting Menu:
1. Press the
VOL
(- or +) button to scroll to
Registration
.
2. Press
SELECT
Soft key and you may program the following items: Register and Remove
Handset.
