RCA 25255RE2 - ViSYS Cordless Phone Base Station User Manual Download Page 29

Page: 29 / 54

Redial

1. Press the

Talk

button on the cordless handset, or press the

Spk

button (speakerphone

mode), or press the

headset

button (headset mode), or pick up the corded handset

from the base and the

rst available line will go off hook. If both lines are available, Line

1 will be used.

-OR-

Press a

line

button to select a line.

2. Press the

redial

button. The redial number list (last 3 previously dialed numbers) is

shown.

3. Use the

VOL

(- or +) button to select the number. Press the

DIAL

Soft key to dial out the

number.

NOTE: If the number you dialed is longer than 32 digitals, It will not be saved in the redial
list and can't be redialed.

Reviewing the Redial Numbers

Your phone records up to three previously dialed phone numbers.
1. When the phone is idle, press the

redial

button.

2. Use the

VOL

(- or +) button to view the last three previously dialed numbers.

3. While the preferred number is displayed, press the

Spk

Talk

, a

line

button, or pick up

the corded handset to dial the phone number.

NOTE: If you do not select a line button, the line is automatically seized and the

number is dialed accordingly.

Storing a Redial Record in

Directory

1. Make sure the phone is

OFF

(not in Talk mode).

2. Press the

redial

button, then use the

VOL

(- or +) button to scroll to the desired redial

number.

3. Press the

SAVE

Soft key.

4. The screen displays

Enter Name

. Input a name by pressing the keypad.

NOTE: More than one letter is stored in each of the number keys so it requires

more than one press for some letters. For example, for the letter “B” press the

number 2 key twice. To add a space press the 1 key.
NOTE: A name must be input otherwise the record cannot be stored.

5. Press the

SAVE

Soft key. The desired redial number shows in the display.

6. You can edit the telephone number by using the

delete

button and number keys .

7. Press

SAVE

Soft key to enter the VIP Tone Melody selection.

8. Use

VOL

(- or +) button to scroll to the desired ring tone melody and press

SELECT

Soft

key to complete.

NOTE: If an incoming call number matches this record the VIP Tone Melody will

ring.

Summary of Contents for 25255RE2 - ViSYS Cordless Phone Base Station























































Search results

Summary of Contents for 25255RE2 - ViSYS Cordless Phone Base Station

Reviews:

Related manuals for 25255RE2 - ViSYS Cordless Phone Base Station

Brands by name

Popular brands

RCA 25255RE2 - ViSYS Cordless Phone Base Station, User Manual

Search results

Summary of Contents for 25255RE2 - ViSYS Cordless Phone Base Station

Reviews:

Related manuals for 25255RE2 - ViSYS Cordless Phone Base Station

Brands by name

Popular brands