26
Making Calls in the Speakerphone Mode
(from the base)
1. Press the
speaker
button (in base), the unit will pick the available line for you. If both
lines are available, Line 1 will be used
fi
rst.
-OR-
Press
line 1
or
line 2
button on the base to select the line, and the base’s speaker will
activate.
2. Wait for a dial tone then dial a phone number or press
One-Touch/Memory Log
button
(1-10 ) to dial stored phone number.
3. Press the
speaker
button when
fi
nished.
NOTE: After pick the line, the call timer starts to run until all the calls are hung
up. The timer serves for both 2 lines.
Making Call in the Speakerphone Mode
(from the handset)
1. Press the
Spk
button to activate the speakerphone on the
fi
rst available line.
-OR-
Press the
LINE 1
or
LINE 2
Soft key to select a speci
fi
c line. The handset will activate the
ear piece.
2. Press the
Spk
button to switch to speakerphone mode.
3. Wait for a dial tone then dial the phone number.
4. Press the
end
button when
fi
nished.
Making Calls with the Optional Headset
1. Plug the headset into the Headset jack on the side of the base or side of the cordless
handset.
2. Adjust the headset to rest comfortably on top of your head or over your ear.
3. Move the microphone to approximately 2 to 3 inches from your mouth.
4. For the base, press the
headset
button on base and the phone automatically selects
fi
rst available, if both lines are available, Line 1 will be used.
5. For the cordless handset, press the
Talk
button.
6. Wait for a dial tone, and then dial the phone number.
7. Press
headset
button (on base) or
end
button (on handset) when
fi
nished.
CAUTION : Use Thomson Inc. 5-2425 or other compatible headset that is compatible
with this unit .
NOTE: If the headset is not connected (or if not completely inserted into headset
jack), an error tone is heard when the Headset button is pressed.
NOTE: Headset performance may vary depending on the quality of the headset.
.
