Raytheon Anschütz 108-010.NG001 E01, Operator'S And Service Manual

Page: 49 / 80

Magnetic Sonde
7 Installation and Maintenance
Edition:003 39 4423
11.Remove the 3 nuts ( Fig. 15 /5) with washers ( Fig. 15 /6).
12.Remove the plate ( Fig. 15 /7).
13.Remove the 3 screws ( Fig. 15 /8) with washers ( Fig. 15 /9).
14.Remove the lower plate ( Fig. 15 /10).
15.Place the lower magnetic sonde ( Fig. 15 /11) on the plate ( Fig. 15 /7).
16.Install the lower plate ( Fig. 15 /10).
17.Install the 3 screws ( Fig. 15 /8) with washers ( Fig. 15 /9).
18.Install the plate ( Fig. 15 /7).
19.Install the 3 nuts ( Fig. 15 /5) with washers ( Fig. 15 /6).
20.Secure the 3 nuts with Logtite 243.
21.Install the new holder to the magnetic compass, see
Fig. 15 .
22.Remove the 3 screws ( Fig. 15 /1) with washers ( Fig. 15 /2).
23.Remove the upper plate ( Fig. 15 /3).
24.Place the upper magnetic sonde ( Fig. 15 /4) in the holder.
25.Install the upper plate( Fig. 15 /3).
26.Install the 3 screws ( Fig. 15 /1) with washers ( Fig. 15 /2).
Close Up
1. Connect magnetic sonde to responding system or equipment, see chapter 7.3.3 .
7.4.4.5 Install Holder
Requirements
Required Conditions
No conditions
Required Persons
1 Maintainer 0.5 h
1 Assistant 0.5 h
Support Equipment
Mask, centering 05-0000 03 1 EA
Consumables, Materials and Expendables
No consumables, materials and expendables
Spares
No spares