manualshive.com logo in svg

Raytheon Anschütz 108-010.NG001 E01, Operator'S And Service Manual

The Raytheon Anschütz 108-010.NG001 E01 Operator's and Service Manual is essential for anyone using this product. With its comprehensive instructions and guidelines, this manual ensures smooth operation and maintenance. Download this valuable resource for free from our website and unlock the full potential of your Raytheon Anschütz 108-010.NG001 E01.

Share
Download
background image

Magnetic Sonde

7 Installation and Maintenance

4423

24

Edition:003

Safety Conditions

 WARNING!

Danger due to nonadherence to safety instructions

Risk of death or serious injury and material damage
• Observe all general safety instructions.

• Observe all safety instructions for maintenance.

Procedure

Fig. 10: Measuring Points of Magnetic Sonde
1. Disconnect the magnetic sonde from related system or equipment.
2. Connect a resistance measuring device to measuring points 

1

 (SIGNAL R2) and 

2

(SIGNAL R1) of the magnetic sonde.

3. Check the resistance between the 2 measuring points.

► The nominal resistance must be 151 Ohms.

4. Connect the resistance measuring device to measuring points 

4

 (SIGNAL S2) and 

5

(SIGNAL S1) of the magnetic sonde.

5. Check the resistance between the 2 measuring points.

► The nominal resistance must be 146 Ohms.

6. Connect the resistance measuring device to measuring points 

4

 (SIGNAL S2) and 

3

(SIGNAL S3) of the magnetic sonde.

7. Check the resistance between the 2 measuring points.

► The nominal resistance must be 146 Ohms.

8. Connect the resistance measuring device to measuring points 

5

 (SIGNAL S1) and 

3

(SIGNAL S3) of the magnetic sonde.

9. Check the resistance between the 2 measuring points.

Summary of Contents for 108-010.NG001 E01

















































































Reviews:

No comments

Related manuals for 108-010.NG001 E01

versa ag leader Operator'S Manual preview
ag leader
Brand: versa Pages: 304
Foshk WS112 Instruction Manual preview
WS112
Brand: Foshk Pages: 5
Coghlan's Big Screen Instruction Manual preview
Big Screen
Brand: Coghlan's Pages: 20

Brands by name

Popular brands

Load more brands