Raytheon Anschütz 108-010.NG001 E01, Operator'S And Service Manual

Page: 46 / 80

Magnetic Sonde
7 Installation and Maintenance
4423 36 Edition:003
Procedure
Fig. 14: Replace Holder for 108-010.NG001 E01, 108-010.NG002 E01 and
108-010.NG004 E01
1 Screw
2 Washer
3 Plate
4 Magnetic Sonde
1. Remove the 3 screws ( Fig. 14 /1) with washers ( Fig. 14 /2).
2. Remove the plate ( Fig. 14 /3).
3. Remove the magnetic sonde ( Fig. 14 /4).
4. Provide a new holder.
5. Dispose of the defective holder.
6. Install new holder to magnetic compass, see
Fig. 14 .
7. Remove the 3 screws ( Fig. 14 /1) with washers ( Fig. 14 /2).
8. Remove the plate ( Fig. 14 /3).
9. Place the magnetic sonde in the holder.
10.Install the plate.
11.Replace the 3 screws with washers.
Close Up
1. Connect magnetic sonde to responding system or equipment, see chapter 7.3.3 .