4
rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Basic Steps
(Quick Installation Guide Pg. 1-20)
STEP 1: Safety Information (Pg. 2)
STEP 2: Wiring Installation (Pg. 6)
For PoE, use standard CAT 5 or better for both power and data. For all 8 sized
products, check the PoE detection resistance of the illuminator is compatible with
your PoE equipment (24.9KΩ class 6 is factory default).
For low voltage (non-PoE) apply 24V DC to red and black cores of auxiliary cable
and use standard CAT 5 or better for data connection. Connect external inputs
and external output wires as required.
IMPORTANT:
Ensure PoE equipment or 24V PSU are suitably rated
For 8 sized products check PoE detection resistance is set
correctly
Ensure Cat 5 cable and auxiliary cable are correctly terminated
and waterproofed after installation
If using low voltage, a CAT 5 cable must still be connected to
the network for communication
If not using auxiliary cable, it must still be suitably terminated
and waterproofed
STEP 3: Physical Installation (Pg. 9-10)
Adjust interchangeable lens if required.
Fix to wall, pole or camera unit using U bracket provided or other Raytec bracketry.
IMPORTANT:
Ensure illuminator is rated to provide required viewing distances
and select correct angle
Ensure illuminator is orientated in the correct direction
