15
rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Name
VARIO2IP
Group Name
<<Deliberately Left Blank>>
IP Address
Software version 2.5.x or above : Automatically
assigned by DHCP if connected to a DHCP
network otherwise IP address starts with 169.254
followed by 2 random octet numbers. Software
version <2.5.0 : Static IP Address 192.168.2.80
Enable DHCP
Checkbox
Selected – IP address will be automatically
allocated. If illuminator is being operated on a
DHCP enabled network, DHCP can be selected for
automatic allocation of IP address.
Illuminator Mode
Local: Control the illuminator using the web
interface. Illuminator will respond to its own
photocell and telemetry events.
Standard Setup – Factory Defaults
The illuminator is operating in Local mode and will respond only to its own photocell
and telemetry status. By default the illuminator is NOT assigned to a group.
The illuminator will turn ON / OFF automatically when the photocell detects it is
dark / light at 100% (soft start) via the photocell.
The External Input will activate the illuminator at 100% (NOT soft start) for the
duration of the input provided the photocell detects it is dark.
External Output: activated by photocell and will become active when short circuit,
unless changed in advanced settings on the GUI.
Factory Defaults
Photocell
External Input
Trigger Control
Illuminator Control
Illuminator Control
Respond to Group
Commands
No, ignore group
command
No, ignore group
command
Illuminator Mode on Trigger
On
On
Power (%)
100%
100%
Duration
All night
Duration of Input
Soft Start
On
Off
Deterrent
Pattern = SOS
Frequency = Slow
